Moulding Time

Posted on 18th June 2018 by admin under Construction, News

It’s been a while since we’ve posted any thing, but the team as not been idle.  Lots of stuff has been happening with the electronics, and our drive system.  We’ve also started making some moulds for our tires.  Including making a nice moulding box.

Written by admin

Related Posts

We are going to a folk festival

Yes you read the subject correctly, Blake robotics going to IVFDF at Sheffield University and we will be doing a workshop on the Saturday morning (24th Feb).  So if you like folk and combat robotics  (and we admit that’s one heck of a venn diagram), then come a join us.

Posted on 20th February 2018 by

A sense of balance

Those who watched the video of our weapons test, would have noticed the robot wobbled as the blade span up. This is because we had not balanced the blade, i.e. one half of the blade had more mass that the other half. This meant we had to balance the blade (add some weight to one… Read more »

Posted on 20th October 2017 by

Weapon test

We’ve been field testing our weapon.  This is the first time we’ve spun the blade up using the motors, all in all a successful test.  With only small tweaks needed to get it running nice and smoothly.  More videos to follow.

Posted on 4th October 2017 by

LED Board

We made a little LED driver board for doing our atmospheric lighting.  It’s got a little ATtiny on-board that handles all the effects like fade in and out.  We can control it over I2C from our Pi to change which effect it’s currently running.  If you want to check it out and make your own… Read more »

Posted on 14th April 2017 by

Leave a Reply